Protege Outdoor Landscape
Speaker Systems

Best Installation + Performance + Value

Unlike high performance outdoor landscape speakers that require expensive high-power amplifiers, the Protege Landscape Series is designed to deliver an exceptional outdoor speaker experience with lower power distributed audio amplifiers or extended audio zones (like Zone 2) from conventional AVRs. Protege can be expanded to up to an 8.2 system.

Hardscape Subwoofer

In the Garden or On the Deck

Not every outdoor environment can accommodate an in-ground outdoor subwoofer for an outdoor sound system, so in addition to the traditional In-Ground Subwoofer, Protege introduces an all-new Hardscape above-ground Subwoofer to add to your landscape speaker system. Ideal for locations such as brick or stone patios, second-floor balconies, areas with extra rocky soil or ground with a high water table. The Hardscape Subwoofer includes stainless steel mounting screws for surface mounting and aluminum tent stakes for securing in a garden bed.

RELIABLE PERFORMANCE

Weatherproof Design

The weatherproof fiberglass reinforced ABS enclosures are rugged, ensure years of reliable performance and are able to stand up to any weed whackers and outdoor lawn equipment. Both the Burial and Hardscape Subwoofers are built using a weatherproof, low-noise Rotational Molded Polyethylene enclosures. And both include a high-excursion eight-inch DVC woofer with rubber surround and includes a 2nd order crossover on both channels.

In-ground Satellite Speakers

Quick-Connect Installation

Proficient Protege satellite speakers feature the same ‘quick connect’ design found in our high-performance Landscape audio system series. We even include a handy hammer cap that protects the stake from damage when pounding it into the outdoor area ground. This allows for the speaker to be attached to the stake after the stake is inserted into the ground attachment to the stake. Once attached, the speaker can be rotated and tilted to the optimal angle, then tightened into place with the ergonomic thumbscrew.

Award-winning Performance

Easy System Expansion

Expand your system up to an 8.2 configuration by putting 2 kits together or by adding additional satellites via the PAS-2.0 two-speaker expansion kit.

Outdoor Speaker Kit with Burial Subwoofer

PAS-4.1-BU

  • Includes (4) 4” Satellite Speakers with quick connect stakes & (1) 8” DVC Burial Subwoofer
  • Weatherproof 4” Satellite Speakers with Polypropylene Cone Woofer and ¾” Titanium Dome Tweeter
  • Weatherproof 8” Burial DVC (Dual Voice Coil) Subwoofer with Polypropylene Cone
  • Power handling: up to 200W (Max)
  • Designed for use with distributed audio amplifiers or AVRs
  • Frequency Response: 34Hz~20kHz
  • Nominal Impedance: 8 ohms per Channel
  • Post Installation Pivot and tilt with Toolless thumbscrew
  • Includes Silicone-Filled Wire Connectors for all connections
  • Includes hammer cap for stake installation
Learn More
Outdoor Speaker Kit with Hardscape Subwoofer

PAS-4.1-HS

  • Includes (4) 4” Satellite Speakers with quick connect stakes & (1) 8” DVC Hardscape Subwoofer
  • Weatherproof Satellite Speakers with Polypropylene Cone Woofer and ¾” Titanium Dome Tweeter
  • Weatherproof 8” Hardscape DVC (Dual Voice Coil) Subwoofer with Polypropylene
  • Power handling: up to 200W (Max)
  • Designed for use with distributed audio amplifiers or AVRs
  • Frequency response: 38Hz~20kHz
  • Nominal Impedance: 8 ohms per channel
  • Post Installation pivot and tilt satellite speaker with toolless thumbscrew
  • Expandable to 8.2
  • Includes Silicone-Filled Wire Connectors for all connections
  • Includes hammer cap for stake installation
  • Includes Stainless Steel mounting screws for surface mounting
  • Includes Aluminum Tent Stakes for garden bed mounting
Learn More
Outdoor Satellite Speaker Expansion Kit

PAS-2.0

  • Includes (2) 4” Satellite Speakers with quick connect stakes
  • Weatherproof Satellite Speakers with Polypropylene Cone Woofer and ¾” Titanium Dome Tweeter
  • Power handling: up to 100W (Max)
  • Designed to expand either SC-TERR-4.1-HS or SC-TERR-4.1-BU
  • Frequency response: 120Hz~20kHz
  • Nominal Impedance per speaker: 32 Ohms
  • Includes Silicone-Filled Wire Connectors for all connections
  • Includes hammer cap for stake installation
Learn More